Anyone have a spare oil cooler bracket Audi PN# 034117185G or know of an aftermarket solution
-
-
I think I have a spare. Confirm you need the drop down bracket, not the air guide bit?Nothelle S2 Avant
Black Ur project
Silver Rs2 Project gone
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone -
This is the part I need, and to be honest I also need the oil cooler. I can find them in Germany but not the UK
Capture.JPGComment
-
Ok, sorry. I don't have that bit, only the drop down bracket. Most of us have done the MGB GT oil cooler modification and deleted the Aux.Nothelle S2 Avant
Black Ur project
Silver Rs2 Project gone
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project goneComment
-
How much do you want for the drop down bracket, I'm sure that is shot as well just cannot see it very well.Comment
-
Let me dig it out first. I will send you a pm.Nothelle S2 Avant
Black Ur project
Silver Rs2 Project gone
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project goneComment
-
I would advise getting a bodyshop welder to copy or repair your existing oil cooler bracket. I did that on my S2 avant a few years back and it was a huge improvement. The old one had more holes than swiss cheese and he was able to salvage it and weld in new metal. The only bit that really needs rescued is the two studs and the bracket that holds them.
Mike
http://www.s2-audi.co.ukComment
-
My bracket has big chunks out of it due corrosion. At the moment I don't want to touch it as I fear it will disintegrate, I'll take a picture tomorrow but there is no way you could weld on the bits of rust that are left. The fins on the oil cooler are also just falling apart as soon as you touch them.Comment
-
Here's mine after removal :
. After some welding and repairs - 
Mike
http://www.s2-audi.co.ukComment
-
This is the state of my bracket. it's 100% rotten and you can just snap chunks off it. It does look like I'm going to have to get one made.
20211009_103022 (Large).jpg
20211009_103116 (Large).jpgComment
Comment